Paddle Blind - Paddle Blank

The Paddle Bind is usually known as Spade or Paddle Blank. The Paddle Blind is made from a cut disc in different type of material, with a handle supplied in different forms according to the dimensional standard. They can be manufactured with raised face, flat face or ring type.

The Paddle Blind is inserted between two Flanges (with a Gasket on each side) to stop the fluid.

La Meccanica Padana manufactures paddle blinds from 1/2" to 60" with different type of joint face (RF, FF, RTJ) in series 150/300/600/900/1500/2500 in according to major dimensional standards and in different types of material as follow:

• Carbon steel (ASTM 105, A516 Gr. 60/65/70, A350 LF2, A694 F60-65)
• Stainless steel (AISI 304, 316, 321, 347)
• Alloy steel (AISI Gr.1, Gr.5, Gr.9, Gr.91, Gr.11, Gr.22)
• Nickel alloys
• Duplex/Super duplex (F51, F53, F55, F44)
• Incoloy (800, 800H, 800HT, 825), Alloy 20
• Hastelloy (C22, C276) 
• Cupronickel Cu-Ni
• Monel 400
• Inconel (600m 625)
• Titanium (Gr. 1, 2, 3)

PADDLE BLIND DATASHEETS

Here you can see our Paddle Blind datasheets of the major dimensional standards.